November 17, 2019
  • 8:44 pm Home Decorating Ideas For The Living Room – Creating A Welcoming Space
  • 2:21 am Victoria Flooring Installation Hourigan’s Wide Selection Of Materials And Expertise
  • 4:52 pm Improve The Worth Of Your Home With These Handy Tips
  • 4:43 am The Difference Between Bamboo Laminate Flooring And Ordinary Laminate Flooring
  • 11:34 am Tips for Decorating Your Christmas Tree

For a keen cook, a shiny new bespoke kitchen design is one of the most rewarding gifts you’ll ever give yourself and your family. The kitchen is usually the heart of a home and in this article we’ll look at some ways to get the kitchen of your dreams.

Before starting, one extremely important thing to remember is cost. It’s very easy for kitchen projects to spiral out of control. Whether you’re rebuilding or renovating a room there are always hundreds of small expenses you never even thought of when you were in the planning stage. While some of these costs are unavoidable, there are ways to keep the price down, afterall there’s no reason why the price of your dream kitchen has to be a nightmare.

Once you have assessed your kitchen needs and decided how you want to go about executing them, it’s time to put pen to paper and start designing your new kitchen. Kitchens can come in all shapes and sizes, from galley kitchens to octagonal round house kitchens. You should remember that the same cabinets, appliances and surfaces can look entirely different in someone else’s home than in yours.

Standard stock cabinets can be given a unique look with virtually unlimited specialty finishes including brushed steel and gloss. If your budget can stretch to custom cabinets, your choices are almost unlimited.

Worktop materials already come in a great array of choices, but they can be customized even further with special routing or inset bands of another colour or material. If you’re short on storage space you could have a granite worktop cut to incorporate a built in chopping board. The same goes for flooring where you could have marble tiles interspersed with oak floorboards, walls and furniture. So even if your kitchen is small and ordinary, you can still have a bespoke kitchen design.

To create a distinctive and stylish kitchen , your first move is to decide where the focal point of the room is. A large window, alcove, or long wall are all common options. If you have the space, you should also consider an island. A kitchen island can be a cheap and attractive way to expand your work area. An island can also allow you to add a second sink, dishwasher or oven to your bespoke kitchen design. If you add under floor wiring, plumbing and gas lines, the possibilities for an island are endless. Just about any appliance can be located in an island if the plumbing and electrics are planned properly. A wine rack, a gourmet wine chiller, an under-cabinet fridge or concealed bin are all options that can help free up storage space and also give your kitchen a unique look.

Carrying this out leads to a messy situation and also burning a major hole on your bottom line from engaging professionals to rectify the urgent problems.

Often, spending some serious amounts of uncovering a desire to perform “maintenance list” can help prevent one from being caught in such situation. Listed here are some tips I gathered from my plumber to make certain that home drainage piping systems are functioning well.

* Don’t wash your complete grease and oil around the dishes down your drain.

Often, after preparing and enjoying our meals, we dump the full dishes while using food prep sink and wash every one of the grease and oil from your utensils down the sink. That is most certainly a large no as grease and oil residues end up choking the pipes as well as no time, you destroy start to choke. Instead, try to wipe grease and oil utilizing a paper towel before doing the restroom. Also, from a about a week of washing (or after any festive seasons if you did a great deal of cooking and washing, operate a kettle of boiling water down your drain. The river will melt any grease or oil residues that have accumulated within your pipes and clear them.

* Ensure all floor traps in toilet and kitchen are cleared regularly.

The purpose of floor traps is usually to trap dirt from entering your pipe system and find yourself choking them. Almost all of the so for trapping hair within the shower room. You’ll be surprised at the amount of hair accumulated by all family having a week. Clear those hair strands right into a trash can and do not throw them into your pipe or toilet bowl for convenience.

* Watch what you throw into your toilet bowl.

Don’t let yourself be lazy and treat your toilet bowl being a trash can, emptying any hard to dissolve particles like tissues, cotton pads, company, pampers or sanitary pads. I became relayed through my plumber that they may really often do find such items stuck in the toilet bowls of homeowners. If you absolutely use a maid, that is normal for many Singapore families, make certain your maid knows it reason for addition to often, in their hometowns, they will often not utilized to using such products in addition to our sanitary system.

Some plumbing emergencies may be avoided after a little little effort and maintenance. While the process won’t guarantee you won’t ever talk with plumbing emergencies, it’s going to definitely decrease the likelihood of calling for a plumber frequently.

Do you want to create ‘distressed look’ kitchen cabinets and give a whole new look to your kitchen or other areas? In decorative arts, distressing is the art of making pieces look very old and worn. Distressed cabinets are used to give a kitchen a vintage, antique style. There are many methods of aging wooden furniture. Mostly these involve removing layers of paint in uneven patches, leaving remnants of layers that show different colors, or even bare wood beneath. The aim is to have a ‘look’ that is rustic, imperfect and aged. Have you seen those ‘distressed’ pieces in trendy furniture shops where the distressing method has obviously been to press imprints into the timber or wood, with an instrument in places precisely measured to be equidistant from one another? This is not what we are after!

We want to end up with a piece that is very authentic looking and looks as though it has been aged naturally over the decades. You don’t achieve this by whacking at the wood with a sledge-hammer, either! Sandpaper and paint stripper are used to remove old paint and to get back to the bare wood. The finished piece can be refinished with glaze (thinned paint) or varnish, if wanted. Can I distress kitchen cabinets myself? Yes, you can easily do this! This is a good ‘finishing’ technique for beginners and as long as you are accepting of how your piece will turn out, you can have a lot of fun creating a set of antique-looking cabinetry in your kitchen.

You’ll need sandpaper of differing grades of coarseness, brushes and some light colored paints. All available from your local hardware store. These techniques can be applied to many surfaces such as wood, glass, metal, stone, concrete, plaster and paint. The Shabby-Chic style has made antiquing techniques very popular. And, these cabinets look great in a kitchen along with the ‘right’ accessories.

Techniques: Deliberately sand, dent, scrape and gauge out little dents and holes in the cabinet faces and tops. To distress the wood, you can use a chain to throw against the wood, a screwdriver to gauge, a medium sized hammer to implement dents. Keep sanding in between these activities. Now you can use the and stain or varnish you’ve chosen to darken the wood. You’ll find that a light colored varnish, such as a marine varnish, will look wonderful as it will bring out all the beauty of the grain of the wood as well as having the added bonus of being waterproof. This is really very necessary for kitchen cabinetry as things are always getting damp, if not wet.

You can buy antiquing paints and varnishes to apply on the top in layers or patches, one layer above the last. To add to the aging look, water down the colors with thinners or water. This will look like a color wash. As the paint dries, keep sanding little areas to give a worn finish. If you like, you can add a crackle varnish as the last layer – this will give an antique appearance. Take some off again with a light sand in a few places to show how the cabinet has been worn.

Add some lovely knobs or handles in wrought iron to finish the cabinets.

So, you see, totally fool-proof! By following these techniques, you’ll have beautiful distressed kitchen cabinets for your vintage style kitchen. Every piece is of unique interest and once you add some accessories such as open shelving displays of china, you’ll be very pleased with the look you have achieved! This technique is especially good for country style and rustic kitchens.

Sliding sections of cupboards are good for large and small kitchen. Because they are not wide their depths is used reasonably. Food is kept in the latticed boxes. Such section rolls out easily, food is well visible and can freely be taken out from any side. It is easy to roll the section back; last inches are pulled inward automatically. For those, who prefer their cupboards to cover the whole wall, we recommend multi-tier cupboards. It will allow rolling out only the necessary part. If you set an oven ergonomically, there will be no need to bend over. It would seem that nothing will be placed in a few inches. If you equip it with moving cupboard, it will be possible to place a lot of various small things.

There is a great range of hidden storage systems, which allow using difficultly accessible corners, niches, empty spaces effectively. For example, there is such an innovation, as three-level micro lift which lowers a shelf with all of its content.

There are a lot of roomy sliding baskets of different sizes. It is convenient to keep all the detergents under the sink in a sliding basket. Various open units, such as shelves, niches, wall panels, decorative columns with boxes give additional possibilities for space constructing and designing.

Such accessories as hooks for ladle, a stand for bottles and glasses, plates drier, appliances for paper towels, a trivet for hot things and others offered by modern companies also allow designing nice functional kitchens. As a rule, things contacting water or storage of detergents, a corner column or space under the sink is covered with stainless steel.

A drop-leaf serving table on wheels with sliding cutting board is very comfortable. The lower open shelf for plates is supplied with stoppers; the piles of sparkling clean plates become the element of interior. Such new decisions of space designing and logical combinations are developed as exclusive elements of kitchen furniture of high class. But unfortunately we change kitchens rarely. And what can be done, if your kitchen does not satisfy you with such innovations?

It is possible to fit wall cupboards with sliding doors in free niches, even when opened they do not take a lot of space, which is so necessary in a little room. Similar constructions extend space ideally. The revolving vertical bar will take minimum space and is very comfortable at the same time. Use the space between a working surface and wall cupboards to fit a narrow shelf or railing system on the wall between them. It is possible to keep kitchen utensils which usually take space on a working surface on them. Consoles for holding a microwave on a wall free the working space on a working surface. Microwave can be placed in a cupboard.

It is convenient to hang on railings not only kitchen utensils but also small decorative things. Additional possibilities of sliding tables can be used not only for the evening tea-drinking but also for preparation of food on them. Movable or folding dinner-table mounted in a wall behind a door may be of service. Even a kitchen board can be compacted between table top and a sliding drawer. A bin is not that important, but if you place it right, it will save you from many additional movements. Kitchen comfort is the absence of problems with finding small things, the possibility to find a maximally comfortable place for everything. It is when everything works comfortably, quietly and easily. When, professionally speaking, kitchen space is rationalized.

It doesn’t matter if you live in a home with a modern kitchen that has all the fancy upgrades, or one that just has a single overhead light in the center of the room. If you’re not using the latest generation of energy-efficient bulbs, it’s time for a lighting upgrade.

“Kitchen lighting has made great strides in the past couple of years, not just from a design standpoint, but with regards to energy efficiency. So upgrades are definitely worth looking into,” says Joe Rey-Barreau, education consultant for the American Lighting Association (ALA) and an associate professor at the University of Kentucky’s School of Interior Design. He travels the country tracking trends, and one he’s noticed lately is the focus on energy conservation.

“Lighting manufacturers are spending a considerable amount of time, and dedicating a lot of resources to developing fixtures capable of using more energy-efficient light sources than the standard incandescent,” Rey-Barreau says. “And it’s no coincidence that this trend is growing in popularity at a time when energy costs are on the rise,” he says.

As recently as two years ago, the only fixtures available for the kitchen that used the most energy-efficient light sources available today – fluorescents and Light Emitting Diodes (LEDs) – were not aesthetically pleasing. In today’s marketplace, however, decorative energy-efficient fixtures are available in every product category, whether you’re looking for something traditional, modern or artsy.

“We know consumers want to capitalize on the fact that compact fluorescent bulbs are approximately three to four times more efficient than incandescent bulbs, and LEDs can be three to 10 times more efficient, so we’ve dedicated a lot of resources to developing new fixtures that utilize the technology,” says Scott Roos, vice president of product design for Juno Lighting Group. “We’ll be introducing an LED under-cabinet unit in the fall that requires just eight watts of energy to provide the same illumination as an 80-watt halogen light source. Our new LED down light will be 40 percent more energy efficient than a compact fluorescent and 75 percent more energy efficient than an incandescent.”

Holtkoetter International, Inc., a manufacturer of residential lighting fixtures based in St. Paul, Minn., plans to release several models of fixtures that use LEDs early next year. But energy-saving products are nothing new for Holtkoetter. “We’ve been offering fixtures that take halogen IRC bulbs, capable of improving energy efficiency by 50 percent, for the last five years,” says company president Paul Eusterbrock.

Infra Red Coating (IRC) bulbs are designed in such a way that the heat they generate can be recycled and turned into light.

Hubbardton Forge, a lighting manufacturer out of Chandler, Vt., meantime has concentrated its efforts on developing decorative fixtures that take compact fluorescents. “We have offerings in every category for decorative fixtures that really enhance what you get out of a compact fluorescent,” says George Chandler, president of Hubbardton Forge.

No matter which of the new technologies you choose to go with, when shopping for energy-efficient fixtures, Rey-Barreau says it is important to look for the Energy Star label. In order to qualify for the Energy Star designation, the product must meet specific performance criteria for energy-efficient performance set by the U.S. Department of Energy.

As for concerns people may have about the quality of light given off by compact fluorescents and LEDs, Rey-Barreau says that “while in the past color rendering may have been a concern, it is no longer a problem. Consumers can rest assured the quality closely matches that of incandescents.”

Today’s advancements are quite impressive, but what does the future hold? Rey-Barreau expects the lighting industry to work hard at getting more products on the shelves that use the most energy-efficient technology developed to date – LEDs. “Right now LEDs are still kind of expensive, but once they become more readily available, the cost will come down significantly,” he says.