Remove Carpet Stains & Clean Carpet
Throughout the year, carpets can take a toll. Everyday life can leave a mark on your carpets. Spilled food and drinks, art and craft projects, smudged makeup, spilled paint, muddy boots and pets can leave your carpet unsightly and embarrassing. In addition to the visible stains, there is also buildup in carpet. From dander to pollen, unseen particles can cause health related issues which aggravate allergies and skin conditions. Even further below the carpet, bacteria can promote mold growth which can cause respiratory issues and destroy your carpet.
Keeping carpet clean is an important task and should be done not just to keep your house looking presentable, but also to reduce factors that can contribute to poor health. Spring and Fall are the best times to give your carpet a thorough cleaning to remove any buildup which has settled into the carpet over the seasons. However it always seems the carpet needs to be cleaned when it is most inconvenient. An unexpected spill often triggers the urge to clean before the stain sets in. Because of this, people typically grab the most convenient cleaner and start scrubbing away.
Unfortunately, many of these cleaners are unsafe. Many contain harsh chemicals that can impose health risks. Simple Green contains 2-buthoxyethanol, which can damage red blood cells and irritate the eyes. Spot Shot may be fatal if inhaled. Febreeze, 409 and other ammonium or ethonalamine based can cause and trigger asthma. Some of these cleaners have been cited as releasing up to 89 air contaminants. The Environmental Working Group has composed a list of products on their Hall Of Shame. This list outlines the dangers in a number cleaning products.
In addition to being unsafe, many household cleaners do not properly remove stains. Many of these cleaners contain toxins which will alter the carpet. A proper cleaner can safely break down the stain. Genesis 950 is a safe, green cleaner which uses water as it’s primary mode to remove stains. Genesis 950 is a surfactant based cleaner. A surfactant based cleaner uses water to make a stained area water soluble. When a stain becomes water soluble, it’s bonds are broken. Once the bonds of a stain are broken, it loses it’s adherence to the surface it has been attached to. It can then be rinsed from the surface.
Genesis 950 can be used as a spot cleaner to target specific stains, or it can be used in a machine to clean entire carpets. Either way, it is the best cleaner for a number of reasons. First and foremost, it is safe. It does not contain any regulated chemicals like other cleaners. There is no 2-buthoxyethanol, ammonium or ethonalamine. Genesis 950 will not provoke asthma, respiratory issues, or fatal reactions. It is a green product, designed with the safety of the environment, pets, children and families in mind.
Genesis 950 can handle all types of stains. Initially designed in the early 80’s, it has been used for decades to remove industrial ink from printing presses. In 2011 it was made available to the public as a general all purpose cleaner. Because of it’s ability to break down food stains, makeup stains, paint stains, and even pet stains, it has become one of the most popular carpet cleaners on the market.
Pet owners love Genesis 950 because it can remove vomit and urine stains as well as odors. It does so without harming the surface being cleaned, or the pet. In addition to removing stains, it also removes odors.
Remove Pet Stains & Odors From Carpet
Pet urine and vomit can make carpet unsightly. It can also cause a great deal of frustration when it comes to cleaning them. If not properly cleaned, it can also cause a shift in the bathroom patterns of pets. Animals, both cats and dogs, urinate where they smell they have gone before. If an area is not properly cleaned, they will be drawn to that spot repeatedly. Unfortunately, some people follow some terrible advice in regards to cleaning pet stains and find themselves with an animal that keeps going in that spot.
The worst advice by far is the recommendation of vinegar as a solution to clean pet stains. Vinegar, as well as ammonia, has a pH level with an acidic base. This pH level is comparable of that found in urine. As a result, the acidic odor confuses your pet into thinking that is the spot to go to the bathroom. Even the Humane Society advises to stay away from vinegar and ammonia. Likewise, cleaning products containing ammonium compounds have the same effect. It is for this reason you see so many people baffled that their pets won’t stop going in the house. More often than not, it is not a housebreaking issue, but an issue revolving around cleaners used that draw animals to urinate in the spot they were used.
Another issue in dealing with pets is the odor below the carpet surface. When an animal urinates on carpet, the urine travels downward. It becomes infused in the padding and the fibers of the carpet. Surface cleaning a spot will not remove the odor underlying the carpet. While you might not be able to smell it, you pet can. As they sniff about the carpet, when they come across the section with an old stain in the padding, they are likely to go to the bathroom there again.
Another huge misconception is that baking soda or air fresheners will remove the odor. This is false. Baking soda is a neutralizer when introduced to an acidic component. Neutralizing and odor is not the same as deodorizing. To remove pet odors, the bacteria causing them needs to be destroyed. Air fresheners, in addition to releasing contaminants and asthma inducing chemicals, only mask odors. They do not neutralize or deodorize them. Genesis 950 kills the bacteria in the carpet and completely removes the odor . . . safely!
This carpet was full of pet stains. It was cleaned with traditional cleaners over the course of several years. The cleaners themselves created more staining and left discolored blotches throughout the carpet. Typically, these cleaners are soap based. As soap attracts dirt, the marks left behind by those cleaners only became more prominent as time went on.
Because the cleaners used did not deodorize the area, the pets repeatedly went to the bathroom throughout the carpet. This was not a housebreaking issue. It was an issue caused by the odor not being properly removed and the animals being drawn back to that spot as their bathroom.
Pet stains, as well as other stains, should be cleaned using a steam cleaning or carpet cleaning machine. There are a number of machines available for retail consumers. They are great investments, as they can restore carpet and keep your home clean. For those who prefer, these machines can be rented from local grocery and hardware stores. Genesis 950 is compatible with all types of cleaning machines.
To remove pet stains, and the associated odors, Genesis 950 should be used at a mixing ratio of 1/3 Genesis 950 to 2/3 water. Typical cleaning recommendations for general cleaning are 1 part Genesis 950 to 7 parts water, however pet stains can be more persistent and for this reason, the ration can be increased. In extreme cases, Genesis 950 can be mixed with water at a 50/50 ratio. There should not be more water than Genesis 950 though as it is the water which activates it and enables the stain to be broken down.
After being cleaned in a machine at a ratio of 1/3 Genesis 950 to 2/3 water, the pet stains and odor were completely removed, as were the marks left behind from other cleaners.
Genesis 950 can also tackle surface stains. Whether it’s food, make up or unknown stains, use Genesis 950 in a spray bottle with water at the general cleaning ratio of 1 part Genesis 950 to 7 parts water. Spray the area, then rinse clean with water and allow to dry.
In addition to pet stains, Genesis 950 removes many other types of stains.
Genesis 950 is a cleaner like no other. It removes the toughest stains without polluting the environment, harming you, your family or your pets. If you are looking for a safe cleaner, visit www.genesis950.com and read the reviews, see more photos and find out what else you can clean.
The laminate flooring was invented by Perstorp. The first marketing was done by this company in Europe by the name of Pergo. Valinge innovation invented glue less laminate flooring. Laminate is basically made up of melamine resin which is in turn made up of formaldehyde. As the formaldehyde is very tightly bound over here there is no emission and any damage to health. The laminate flooring installations in Illinois provides a wide range of variety.
In United States laminate floor installation service in Illinois is one of the finest, laminate flooring is also known by the name of floating wood tile. In this a multi layer synthetic product is fused together in a so called lamination process. It has mostly wood or stones along with a photographic appliqu layer covered by a protective layer. The innermost layer has melamine resin and fibber board materials. It has become very popular these days as it is very easy to install and maintain as compared with other floorings such as hardwood flooring plus its durable, cheap and hygienic.
Laminate floorings are packaged in the form of no. Of tongue and groove planks i.e. they can be easily clicked into each other. For easy installations a glue backing is also provided. Laminate floors basically float over sub floors on top of a film/foam. It provides moisture and sound reducing properties. Gap is required between the floor and any immovable object like walls which allows the flooring to expand. Saw cutting on the planks are needed on the edges, door entrances and cup boards. For a neater finish the laminate floor installers in Illinois, after the whole floor is being laid skirting boars is removed and reinstalled.
Its very important to keep the laminate clean because sand particles etc may damage the surface with time in high traffic areas. The presence of water and moisture makes the plank swell, warp etc and so the surface of the laminate should be kept relatively dry, thus water resistant coatings to be applied. To prevent scratching adhesive felt pads are used. Planks must be tapped properly using appropriate tools to avoid visible gaps which occur due to inferior glue less laminate floors. In Illinois, the laminate floor installations use joining mechanisms which holds up the planks thus prevent dust entering the gaps and thus do not require frequent tapings.
There are proper standards defined for laminate flooring materials which are used to perform testing and performance criteria of the laminates. Nalfa is the association which issues certificates after reviewing the following: static load: ability to resist residual indentation, thickness swell: ability to resist swelling after being exposed to water, light resistance: ability of the laminate to retain its color after being exposed, clean ability and stain resistance: ease of clean ability and stain resistance, large& small ball resistance: ability to resist fracture by ball, water resistance: to resist wear through the dcor layer. In Illinois laminate floor installers keep the above standards maintained.
Floor of your property spell out a lot about it and it is necessary
that it confers the best point of view about your home and its worth.
Floor is the most rebuke part of any building, keeping all kinds of
exposure and stiffness. Be it in commercial building, home or a
restaurant, it is important that it will be of the best of the best
quality so as to bear with all these type of exposures. To grant your
floor a better look, you can choose for any of the coatings available in
the market. Epoxy floor coatings will give you the required quality
that will secure the worth and functionality of your edifice is
Water resistant and Stain resistant
Industrial and commercial structures no suspicion is den of task and
there is no boundary the kind of action to be started or the
paraphernalia to be used. It is now colorable that fluid flux will
discover its path on the floor, water will stop for hours before it is
cleaned and there will be oil spills everywhere. Some these kinds of
materials are can harm any floor if continuous for long. The risks of
spillage should not stop the nature of tasks to be undertaken but rather
the best option is to have a long lasting Commercial Epoxy Floor
Coating that will propose incredible protection. Epoxy floor coating
provide you a stainless and water resistant atmosphere ensuring that you
take away on your tasks unhindered. Even, the coated floor can cleaned
easily to and will not renounce messy marks behind it.
Epoxy floor coating comes with powerful gluey properties that make it
long lasting, filth and dust resistant as well as fire resistant. This
makes it a good option for both home use and commercial use. It is also
resist all the impact which simple floors can’t do. For those buildings
housing heavy machinery works, epoxy floor coating can withstand any
amount of reasonable impact without charring. Epoxy coatings have fame
for rebound specifically with strength to bear with heat up to 140
degrees Fahrenheit which making it best of the best for thermal
exposures. Epoxy coat is also chemical resistant. And to make better its
resilience, this coating is made with a decomposing of both base and
curative constituent assorted at a suitable ratio resulting into an
exothermic reaction that toughen the coat giving it a hard plastic
Other Merits of Epoxy floor coatings
Factory Floor Painting is not very expensive as compare to other floor
coatings. It is very easy to apply on floor hence saving money on labor.
You just need a spray gun and you will be finish in a few hours. With
this great quality you have an option of long lasting floor which resist
water, chemicals and stains as well as gives an elegant look to your
floor. It is a provides quality at very low prices.
Tile is an important building material known for its durability, moisture resistance and low maintenance requirements. It is often used in flooring of kitchens and bathrooms but can also be used in a wide variety of applications, such as in making countertops, backsplashes and decorative wall coverings. The most common types of tile are porcelain and ceramic. Each offers distinct benefits and drawbacks that should be considered before making a purchase decision.
Ceramic tiles are made from natural clay, sand and water. These materials are molded to form square or rectangular tiles and then baked in a kiln to remove most of the moisture. Porcelain floor tiles are made from denser type of clay than used in the manufacture of ceramic tiles. These porcelain tiles are also baked at a very high temperature for a longer period which makes the tiles impervious to water reducing the water absorption rate as low as 0.5 %.
Ceramic and porcelain tend to have different overall colorings and appearances.Although ceramic may be glazed to create different surface colors or designs, porcelain is usually left unglazed. White chips in the glaze can be highly visible on ceramic tiles, whereas chips in porcelain are not as noticeable because these tiles are the same color throughout.
Ceramic tiles are best suited for indoors use as they have high moisture content which makes them susceptible to freezing or thawing. This may result in the developing of cracks inside the tiles. Porcelain floor tile can be used both for indoor sand outdoor flooring options as they have very low moisture content and are not susceptible to crack due to freezing.
Porcelain floor tiles although being more expensive than the ceramic tiles are more long lasting as well which ultimately benefits the users. Porcelain is also less porous, making it easier to clean and less likely to stain. Stained ceramic may require replacement due to the difficulty of removing stains from porous tiles.
Porcelain floor tiles can withstand high levels of traffic and increased levels of wear and tear which makes them more durable than the ceramic tiles. Ceramic is likely to chip or crack if objects are dropped on it, and the tiles are not expected to hold up for as long as porcelain units. Ceramic should not be used in most commercial applications, while porcelain can be used in light-or medium-duty commercial projects in addition to residential.
Porcelain is very hard and durable, which can be a problem during installation. Its dense nature makes it difficult to cut, especially when special shapes or rounded edges are needed. However ceramic tiles can be easily installed as it requires fewer special tools. It is also better to use ceramic when working in an oddly shaped area that requires a large number of special cuts.
There are a variety of methods for installing hardwood flooring.
The nail down technique of laying hardwood floors has become very
popular. For those learning how to install hardwood floor, there’s no
simpler or straightforward technique than the nail down technique.
other methods which basically require you to be an amateur carpenter or
even a professional carpenter, the nail down method on how to install
hardwood flooring can be accomplished by anyone who can swing a hammer.
Well, that’s not all it takes. You also have to be persistent, patient,
and willing to try new things if you want to learn how to install
hardwood floor. Also, you need to be willing to read the safety
instructions that come with the tools you’ll be using.
Tools You’ll Need as Your Learn How to Install Hardwood Floor Panels
and Dust Pan – You need to clean up constantly as you learn how to
install hardwood floor to make sure no dirt, sawdust, or other debris
get caught in between the grooves or under the boards.
Crayon – Use this to create guidelines on your sub floor. You’ll also
need it to draw lines where you’ll cut your hardwood panels.
Hammer – Any areas near obstacles or walls where you can’t get enough
space to swing a rubber mallet will have to be reached with your claw
Cutter Knife – Use this often for unforeseen activities
involved as you learn how to install hardwood floor. But the main
purpose of this device will be to cut out any excess wood when
adjustments of only a millimeter or two need to be made.
Drill and 3/32″ Drill Bit – Use this to drill your pilot holes, which
should be slightly smaller in length and circumference than your nails.
This will prevent your flooring panels from cracking when you put the
nails in them.
Hardwood Flooring Nails (2″) – These nails are important because they will be what hold your floor in place.
– This can either be a hammer or pneumatic nail gun. The pneumatic nail
gun is obviously faster and easier, but you have to get it calibrated
just right so that the nails don’t go too far down into the wood and
destroy your hardwood panels.
Rubber Mallet – This is your chance
to pound your frustrations out as you learn how to install hardwood
floor. Actually, you should pound them out gently to bring the surfaces
of the two panels together perfectly. You don’t want to get them too far
apart or your floor will have crevices. But if you pound them too hard
together, you can damage them or push them so far together as to bow
Circular Saw – At the end of each row of boards as you go
into the corner, you will need to cut your floor panels to fit. Any
fixtures in the room will also have to be cut around.
Preparing to Install Hardwood Floor Panels
the nail down method of installing hardwood floor panels is pretty
simple, it should still be done carefully as the hardwood floor has to
endure for many years in whatever form you complete it.
All of the
furniture and obstacles that can be removed from the room should be
removed while you install your hardwood floor panels. This is true even
if it requires manual dismantling and reassembly. For those fixtures
build into the floor of the room, you’ll just have to panel around them.
It’s not the easiest way to go, but you have to do what you have to do
to get your hardwood floor installed. If you have door sills, an old
hardwood floor, baseboards, or carpet, remove them before you begin as
If the surface beneath where you will be flooring is cement
or any other lumpy material, use a felt floor liner to cover this
surface. Then install a plywood sub-floor over it. Once laid, you should
be ready to begin installing the hardwood floor.
Steps on How to Install Hardwood Floor Panels
Put your first floor panel in the corner of the room in which you have
decided to start your flooring. The grooves should be toward the wall
and the tongues should be toward the room.
2. Start adding panels
to make a row. The last panel shouldn’t quite fit right, so you’ll have
to use that carpenter’s crayon to mark where to cut it. Use your
circular saw to cut it. Be very careful not to cut it too small. The
fitting needs to be just about perfect.
3. Use your drill to make
your little pilot holes. Put the nails in to fasten your floor down.
Though it will take longer, you’ll be thankful when you’re done if you
used pilot holes when you’re learning how to install hardwood floor.
Grab the other half of the panel you cut off the row you just completed
and use it as the starting point for the next row. This will seem
strange at first, but when the floor is completed, the offset of the
boards will look really nice. Additionally, if all of your boards
matched up, the floor won’t have interlocked strength.
on doing this as you go through the remaining rows. Use the rubber
mallet as necessary to make the boards and rows nice and snug. When the
rubber mallet won’t fit, use the claw hammer to pull the boards tight.
The last things you need are some giant crevices between your boards
when you’ve finished your new hardwood floor.
6. The last panel is
the hardest one to get put in place, but your floor will look really
awful if you hurry at this step. You need to patiently measure, cut, and
make your last panel fit.
7. Clean the floor you just laid.
Cleaning Up After You Install Hardwood Floor Panels
the process of how to install hardwood floors, cleaning up is important
and overlooked enough to warrant its own follow-up section. But unlike
other nail down method guides on how to install hardwood floor panels,
we want to make sure you understand this step.
Cleaning up is
important because there are little wood chips and saw dust everywhere
after the typical hardwood floor installation. Use your broom and dust
pan to pick up any debris on the floor. These particles, if walked on
and rubbed on by furniture, can make your brand new floor look like a
scratched up old floor pretty quickly.
Unless you went beyond the
instructions on how to install hardwood floors and used glue on your
hardwood panels, there’s no need to get your floor wet before it has had
a chance to settle. This is because you don’t want it to swell before
you’ve moved the furniture back in and given it a couple days to get
itself in its final arrangement.
Special Tips Add-On on How to Install Hardwood Floor Panels
get too aggressive when putting your hardwood flooring in place. It’s
very easy to ruin the surface of floor panels when they’re floating
freely and you’re placing them and pounding on them. Be especially
careful when fixing a row that looks a little bit off.
rubber mallet is sturdy enough, it’ll be the best thing to put nails in
because it won’t do as much damage to the surface of your floor panels.
nailed down floor probably isn’t going to be quite as nice as the one
installed by a professional. On the other hand, it’s going to look
pretty nice on its own. It will probably be about the nicest looking job
an inexperienced hardwood floor installer can do. And if you change
your mind about the floor, it’s one of the easiest hardwood floor
installation methods to undo.
But besides being easy to install
and uninstall, nailed down hardwood floor has some usage advantages over
other types. The main advantage to keep in mind is that a glued down
floor is rigid; once a floor panel is dried in place, it’s there for
good whether it’s snug to the next panel over or not. The loose floor
isn’t attached to anything and can be creaky, bubbly, and move around.
So enjoy your new well-fixed hardwood floor.